Your pool or hot tub is supposed to be a relaxing, safe space, but faulty or outdated electrical wiring can turn it into a safety hazard. Apollo Home offers expert pool and hot tub electrical services in Cincinnati to ensure your backyard oasis is safe and enjoyable for everyone. 

Why Choose Apollo Home for Your Pool & Hot Tub Electrical Needs?

When it comes to water and electricity, it’s best to let the professionals handle the job. At Apollo Home, we offer:

  • Safety First: Our electricians are licensed, insured, and prioritize safety in every aspect of the job. We’ll inspect your existing wiring and equipment to identify any potential problems and recommend the best solution. 
  • Quality Work You Can Trust: Each of our technicians is licensed and undergoes rigorous training. We use quality components to ensure your hot tub’s electrical system is built to withstand wet outdoor environments. 
  • Upfront Pricing: We provide transparent, upfront pricing so you know exactly what to expect before we begin any work. 
Schedule Now

Apollo Home’s Pool & Hot Tub Electrical Services

Water and electricity are a combination that should make anyone nervous, which is why it’s essential to ensure that electrical systems for your pool or hot tub are properly installed. 

Apollo Home’s expert electricians offer the following pool, spa, jacuzzi, and hot tub electrical services:

  • New Pool or Hot Tub Electrical Installation: If you’ve purchased a new pool or hot tub, we can complete the electrical installation and ensure everything is wired safely and up to code, including:
    • Pool Pump & Filter Wiring
    • Bonding & Grounding
  • Existing Pool or Hot Tub Electrical Inspection & Repair: We’ll thoroughly inspect your current setup to identify any issues and perform necessary repairs and upgrades to ensure your pool or hot tub’s electrical system is functioning and safe. 
  • GFCI Outlet Installation: GFCI outlets are required for outdoor outlets to protect from electrical shock in high-moisture areas. 
  • Pool & Hot Tub Lighting Installation: Enjoy your pool or hot tub any time with lights to improve nighttime safety and ambiance. 
  • Underground Conduit Installation: Do you need to run electrical wiring underground for your pool or hot tub equipment? We can safely install underground conduits to protect the wiring and eliminate tripping hazards.  

Whether you are installing a new hot tub or need to rewire an older one, we’re ready to help! Wiring hot tubs, pools, and pumps should never be a DIY job; let the professionals handle it. 

Frequently Asked Questions About Pool & Hot Tub Electrical Installations

Here are some answers to common questions regarding installing pool and hot tub electrical systems:

1. How much does it cost to install hot tub wiring?

Hot tub and pool wiring costs between $1,000 and $4,400, with an average of $2,300. The actual cost will vary depending on what needs to be done. A new circuit, outlet, or subpanel, distance to the main electrical panel, excavation to bury wires, and more can all affect the cost. Talk with one of our consultants to determine what needs to be done and what you would like done, and we’ll give you an upfront estimate. 

2. How long does a hot tub installation take? 

A certified electrician will take between six to eight hours to complete a hot tub electrical installation. They will inspect and test their work before leaving to ensure everything is up to code. 

3. Can I DIY the electrical wiring for a pool, hot tub, spa, or jacuzzi?

Wiring a jacuzzi, hot tub, pool, or spa is complicated, and the installation needs to be to local codes to ensure safety. Water and electricity can be a dangerous combination, and it’s best to have a qualified electrician ensure your wiring is installed properly to eliminate any electrocution or fire hazards. 

4. What kind of components or wiring is used in a hot tub or pool installation? 

Your hot tub panel must be installed at a minimum of five feet away from your hot tub to reduce possible electrocution risks. The power required for hot tubs will depend on their size and pump. Most will require either a 50 or 60-amp, 220 to 240v ground fault circuit interrupter (GFCI). Some may use the smaller 120v GFCI. 

Most hot tub and pool installations require the following:

  • Breaker
  • #6 wire
  • 1-inch PVC conduit
  • Subpanel or double-pole 240 GFCI circuit breaker 

Ready to create a relaxing, stress-free space right in your own backyard? Contact Apollo Home for expert spa, pool, jacuzzi, and hot tub electrical and lighting services in Cincinnati, Dayton, and Northern Kentucky. 

"Ernie & Mike did a superb job on my new furnace and A/C installation. Despite having more than a day’s work to do, they came in and stayed until the job was done. They were organized, efficient, and protected the rest of the house well. Got both furnace and A/C installed the same day. Ernie was courteous, informative, and clearly knew his job better than anyone I’ve encountered before. The units look so good guests now get The Tour of our new system. Apollo is clearly not a fly-by-night company. I would recommend them to anyone in need of a new furnace and/or A/C."
- Jerry A.
"I called Apollo because of a water leak I thought I had in our upstairs shower going into the kitchen. Robbie came and assured me everything was fine & looked at all the other plumbing. He ended up changing a few pipes for our washer & clearing a drain. He was very nice & knowledgeable with all my questions. I ended up signing up for the care plan & was very happy with my service."
- Cassandra B.
"The team at Apollo exceeded my expectations. As a business owner, my attention to the details and commitment to providing excellent service is high. From the sales rep. to the installation team, everyone’s performance was outstanding. For example, the installation team went to great lengths to protect our floors, placing floor runners and across the wood floors and up the stairs. They even were spot washing walls upon their departure. I highly recommend this company."
- Randy B.
"We scheduled an estimate AND a tune-up. We knew something was wrong with our furnace, but hoped we could make it through the rest of the season. Upon telling Bill what our furnace was doing, he warned us immediately what the possible outcome was going to be; a cracked heat exchanger. He watched the flames roll backward, tested carbon monoxide levels, which were so high they meter’s last reading was 5,600 before saying “high”. He immediately shut it down, tagged it, and explained that with levels that high and children in our home he wanted off right away. He continued his inspection and showed us via a camera that not only was it cracked in multiple places, but had holes all over it. He gave us a few options for repairing it; his knowledge as well as genuine concern was beneficial and refreshing. Luckily we also scheduled an estimator, Micah, to come too and we were able to get costs between repairing and replacing (with several options). We decided to replace with a much higher efficiency furnace and one sized properly to our home. Hands down, not only did they both provide us great service and knowledge, but without sounding dramatic, they may have saved our lives. This was our first time calling Apollo, but it won’t be our last."
- Sarah B.
"Apollo is an excellent company. I always receive great service. Alex A. was professional and friendly. He kept me informed during the process of checking my furnace and heat pump to make sure they were working properly. The company makes sure you are notified who is coming and when they are on the way. All my interactions with the company have been wonderful."
- Beverly S.



    Apollo Care Plan