Is it time for toilet repair in Cincinnati or time for a new toilet entirely? Toilets are sturdy plumbing fixtures and often last decades. That doesn’t mean that problems with wear and tear don’t occur along the way, however. It also doesn’t mean that a 1980s toilet is the best choice for the water conservation in the 21st century, even if it’s still fully functional. Here are some guidelines to help you decide whether to call a qualified plumber for toilet repair in Cincinnati or to ask him for recommendations about a new toilet.

Toilet Runs Constantly

The problem is probably a leaky flapper in the bottom of the tank or a defective fill valve. It’s a straightforward fix for a qualified plumber, but get it done ASAP. In addition to the annoyance of listening to a run-on toilet and jiggling the handle to stop it, you’re wasting valuable water.

Leakage Between Tank and Bowl

A rubber “donut” gasket seals the connection between the two components. It’s a more involved fix than replacing a flapper or fill valve, but a professional plumber can separate the two parts, install a new gasket and stop leakage.

Water Seeping Out At the Floor

The wax bowl ring installed on the joint between the toilet bowl and the sewer pipe may have deteriorated. It’s replaceable, but a plumber will have to remove the entire toilet to do the job. If you’ve been thinking about upgrading to a new toilet, now’s a good time to make the switch.

Cracked Bowl or Tank

Repair kits either don’t work at all or don’t work for long. A cracked porcelain bowl or tank should be considered unrepairable—it’s time for a new toilet.

High Water Bills

Older toilets may consume as much as 7 gallons per flush (GPF). In these times of scarce water resources and increased costs, that’s needless waste. Today’s efficient new toilets use only 1.6 GPF while high-efficiency toilets (HET) consume as little as 1.28 GPF.

For toilet repair in Cincinnati or to upgrade to a new water-saving toilet now, contact Apollo Home.